Getting your garage ready for a mini split installation is a bit like clearing the castle courtyard before the dragon arrives. A little preparation goes a long way toward a smooth, fast install day. We want you to feel confident that everything is set so our crew can focus on the work, not on moving boxes or dodging tools.
Getting your garage ready for a mini split installation is a bit like clearing the castle courtyard before the dragon arrives. A little preparation goes a long way toward a smooth, fast install day. We want you to feel confident that everything is set so our crew can focus on the work, not on moving boxes or dodging tools.
Central Texas garages turn into ovens in the summer. A ductless mini split is a smart way to make that space usable year round. At Jester Climate, we keep things simple with a flat $2,400 for materials and labor. No surprises. Once you book your install with a $400 deposit, the rest is due after you see the system running. Here is how to get your garage ready for our visit.
Our crew needs room to work inside and outside. Move vehicles, lawn equipment, storage bins, and any clutter away from the walls where the indoor unit will go. The same goes for the ceiling area if the lineset will run up into the attic. You do not need to empty the whole garage, but give us a clear path to the install location and at least a few feet of open wall space.
Outside, clear the area where the condenser will sit. Remove weeds, debris, and anything that might block airflow. A concrete pad or level ground works best. If you have a fence or bushes nearby, trim them back so the unit can breathe. Good airflow helps the system run efficiently and keeps your dragon happy.
Your mini split will need a dedicated electrical circuit. Our crew will handle the connection, but it helps if you know where your main panel is and if there is an open slot. Do not worry if you are unsure. We will assess the situation on install day and discuss any electrical work needed. Sometimes a simple outlet nearby is enough for smaller units, but we will confirm what is right for your garage.
Also consider access to the attic or crawl space if the lineset will run through it. Make sure that area is clear of stored items and that the access panel is easy to reach. If you have a finished ceiling, let us know ahead of time so we can plan the best route for the copper lines and wiring.
Mini split installation creates some dust and vibration from drilling, but nothing outrageous. Still, it is a good idea to cover any sensitive items with drop cloths or old sheets. Move electronics, tools you use daily, and anything fragile to a safe spot. If you have a workbench near the install area, clear it off or cover it.
Our crew will clean up after the job is done, but taking a few minutes to protect your stuff gives you peace of mind. Think of it as rolling up the tapestries before the castle renovation. We will do our part to keep things tidy, and a little prep on your end makes the whole process smoother.
Not necessarily, but it is common for a mini split to require its own circuit to avoid overloading other outlets. Our crew will evaluate your existing panel and outlet setup on install day. If a new circuit is needed, we can discuss the options and any additional cost. We always give you a straight answer before we start any work.
A standard garage install usually takes one full day. Our crew arrives in the morning and works through until the system is running and you have seen it work. Timing can vary if your garage has unusual challenges like very high ceilings or tricky wall construction. We will give you an estimated window when you book.
There will be some noise from drilling and a small amount of dust, especially when we cut the hole for the lineset. We use dust collection tools and drop cloths to keep things contained. The crew will clean up the work area before they leave. If you have a finished garage with drywall, we take extra care to minimize mess.
That is actually easier for us. Exposed studs give us clear access to run the lineset and wiring. Just make sure the area is clear of insulation, cobwebs, and any loose debris. We can work with bare framing just fine. If you have plans to finish the walls later, let us know and we can leave the lineset neatly routed for future drywall.
Yes, you can keep it open. However, if the weather is very hot or rainy, we might prefer it closed to keep the work area comfortable and dry. Discuss this with the lead technician when they arrive. They will coordinate with you so the door does not interfere with the install or your daily routine.
Ready to turn your hot garage into a comfortable space? Call Jester Climate at (512) 297-7493 or book online. It is a flat $2,400 for materials and labor, with just a $400 deposit to lock in your install day.