When you hire Jester Climate for your ductless mini split installation, you are not just getting a skilled technician. You are getting a full crew that arrives with a castle’s worth of gear, from the dragon’s breath of our vacuum pump to the precise torque of our flare wrenches. Every tool we bring has a job, and we make sure each one is ready before we drive to your home.
When you hire Jester Climate for your ductless mini split installation, you are not just getting a skilled technician. You are getting a full crew that arrives with a castle’s worth of gear, from the dragon’s breath of our vacuum pump to the precise torque of our flare wrenches. Every tool we bring has a job, and we make sure each one is ready before we drive to your home.
You do not need to provide any tools, equipment, or supplies. We bring everything required for a clean, safe installation. That includes drill bits, mounting brackets, line sets, electrical components, and all the specialty tools that make the difference between a system that works and one that works perfectly for years. Our goal is to get your system running on the day of the install, and having the right tools is how we do it.
The heart of any mini split install is the refrigerant line set. Our crew brings a dual-stage vacuum pump that pulls moisture and air out of the lines before the system is charged. This step is critical for long compressor life and efficient cooling. We also carry a manifold gauge set to monitor pressures and a high quality flare tool to create a perfect seal on the copper tubing. A torque wrench is used on every flare nut to the manufacturer’s specification, not just “good and tight.” You will see us use a tubing cutter for clean, burr free cuts and a reamer to smooth the inside of the pipe. These tools are the foundation of a leak free installation.
A professional crew does not guess. We bring a digital multimeter to check voltage, continuity, and amperage at the disconnect and the indoor unit. A refrigerant leak detector helps us confirm the system is sealed before we leave. We also use an infrared thermometer and a psychrometer to measure air temperature and humidity at the supply and return. This ensures the system is performing to its rated capacity. Our level and laser distance measurer are used to mount the indoor head perfectly straight and at the correct height. Every tool has a purpose, and we use them all to give you a system that runs quietly and efficiently.
Central Texas homes come in all shapes, from slab foundations to pier and beam. Our crew brings a heavy duty ladder system that reaches two story rooflines safely. We use core drills with dust collection attachments to keep your walls clean. Personal protective equipment, including gloves and safety glasses, is standard. We also carry a variety of mounting brackets and concrete anchors to handle different wall materials. For electrical work, we bring a voltage tester, wire strippers, and a circuit finder to identify the correct breaker. Our goal is to leave your home as clean as we found it, with a perfectly running mini split and zero mess.
No, you do not need to provide anything. Jester Climate brings all necessary tools, equipment, and materials for a standard installation. This includes the line set, electrical whip, mounting hardware, and all specialty tools. The only thing we ask is that the work area is clear and accessible.
We use a field proven dual stage vacuum pump that pulls down to below 500 microns. This removes moisture and non condensable gases from the refrigerant lines. A deep vacuum is essential for the system to operate at peak efficiency and to prevent compressor damage. We run the pump for at least 30 minutes and then hold a vacuum test to confirm no leaks are present.
We use a high quality flaring tool that creates a 45 degree flare with a consistent thickness. Each flare nut is tightened with a torque wrench to the manufacturer’s specification, typically between 30 and 40 foot pounds. After the system is charged, we use an electronic leak detector to check every joint. This process virtually eliminates refrigerant leaks.
No, we only shut off the circuit that will feed the new mini split. We bring a circuit finder to identify the correct breaker and then lock it out while we work. Your home’s other power stays on. We also install a dedicated disconnect switch near the outdoor unit so you can safely isolate the system in the future.
Call (512) 297-7493 to schedule your installation with a simple $400 deposit and the flat $2,400 rate, paid by card on completion.