Austin ADU Mini Split Install: $2,400 Flat Rate
You need a flat number for your bid today. You need a sub who shows up on the day the drywall crew leaves. That is what we deliver.
| Standard single zone install, weekday | $2,400 materials and labor |
|---|---|
| Same install, Saturday or Sunday | $2,600 materials and labor |
| Joker day | One day each week priced under the weekday rate, day shown on the home page |
| Booking deposit | $400 toward materials |
| Balance | Due on completion |
| Non standard work | Quoted before any work begins |
| Bid line item | Single zone mini split install: $2,400 (weekday), materials and labor. |
| Note | Standard install covers line set, wiring, drain, and mounting. |
| Note | Site walk confirms line set length, circuit size, drain routing, equipment size. |
| Note | Contact (512) 297-7493 for scheduling and repeat work. |
| Scope confirmed | At the site walk |
| Contact | (512) 297-7493 |
Flat Rate for Your Bid
You get one number to plug into your estimate. $2,400 on a weekday, $2,600 on a weekend. That covers materials and labor for a standard single zone install.
No surprise add-ons. If the job is non standard we quote it before any work begins. You know the final number before we start.
- One line item, one phone call.
- $400 deposit books the date. Balance due on completion.
- Non standard work quoted at the site walk.
- Repeat scheduling available. Call (512) 297-7493.
Scheduling That Holds
You pick the date. We confirm it. If anything changes you get told. No guessing, no waiting.
We work around your drywall schedule. The install happens when the space is ready. No timeline promises, just a date that sticks.
- One joker day each week at a lower rate. Check the home page for which day.
- Weekend install available at $2,600.
- Repeat jobs get the same process. Call to set up repeat scheduling.
Clean Install for Walkthrough
Your client sees the unit at walkthrough. It looks clean. Lines are run tight. No mess left behind.
We do not cut corners. The install is complete and tested. You do not have to explain anything to your client.
- Indoor and outdoor units mounted level and secure.
- Line set and wiring run neatly along walls or through chases.
- Drain routed to a proper exit point.
- System tested for operation before we leave.
Repeat Scheduling Across Jobs
One phone call sets up the next install. Same number, same process. Your bid stays the same for standard work.
We track your projects. You do not have to re-explain the setup each time. Just call (512) 297-7493.
What Is Included and What Is Extra
Standard install includes everything for a single zone system: line set, wiring, drain, mounting, refrigerant charge, and system test.
Non standard work gets quoted before we start. That includes extended line runs, additional electrical, custom drain routing, or structural modifications.
- Standard: up to standard line set length (confirmed on site), one indoor and one outdoor unit.
- Extra: longer line sets, additional circuits, complex mounting surfaces.
- Extra: drain pump if gravity drain is not possible.
- Extra: any work outside the scope confirmed at the site walk.
Included in the number
- Supply and return line set installation
- Electrical wiring from disconnect to outdoor unit
- Condensate drain line routing to exterior
- Wall mount bracket for indoor unit
- Outdoor unit pad or wall bracket
- Refrigerant charge and system evacuation
- System operation test and basic performance check
- Cleanup of work area
Quoted before work begins
- Line set runs longer than standard length confirmed on site
- Additional electrical panel work or new circuit
- Custom drain routing with pump or long horizontal runs
- Structural reinforcement for mounting surfaces
- Specialty mounting on stucco, stone, or metal
- Multiple indoor units or multi zone systems
Have these done before the install date and the day runs clean. Anything not on this list gets looked at during the site walk.
- Drywall and painting complete in the installation area
- Power disconnect installed and accessible
- Clear path for line set and drain routing
- Outdoor unit location accessible and level
- No obstructions in the indoor mounting area
- Confirm equipment size with site walk before order
- Arrival and SetupCrew reviews the site, confirms equipment placement, and protects floors and walls. Prep work begins.
- MountingIndoor and outdoor units are mounted using the specified brackets and hardware. Alignment is checked.
- Line Set and WiringLine set is run between units, electrical connections made at both ends, drain line routed to exit point.
- Refrigerant and TestSystem is evacuated, refrigerant charged per manufacturer spec, and operation test run. Any adjustments made.
- Cleanup and WalkthroughWork area cleaned, debris removed. Crew confirms system is running and answers any questions.
Phases run in this order on a standard job. Site conditions change the pace, so nothing here is a timeline commitment. If something on site is different from the walk, you get told before it turns into cost.
$400 materials deposit books the date and buys the equipment for your job. Balance due on completion, on the visit the system runs.
$2,400 weekday. $2,600 Saturday or Sunday. One Joker day each week is priced under the weekday rate. The day moves week to week and it is shown on the home page, so if your schedule has slack you can aim at it.
Non standard work is quoted before any work begins. Nothing gets added to the number without you approving it first.
Running the same install across more than one project? Call (512) 297-7493 to set up repeat scheduling.
- Can I use the weekend rate for a weekday job?
- No. The weekday rate is $2,400. The weekend rate is $2,600. If you need a weekend install, that rate applies. One joker day each week is priced lower than the weekday rate. Check the home page for which day.
- What if the line set needs to be longer than standard?
- Line set length is confirmed at the site walk. If it exceeds the standard length included in the flat rate, we quote the additional cost before work begins. You approve it before we start.
- How do I schedule repeat jobs for multiple ADUs?
- Call (512) 297-7493. We set up a repeat schedule for your projects. Each job follows the same process: pick a date, confirm it, install, done. No need to renegotiate each time.
- What if the site is not ready when we arrive?
- We confirm the date with you beforehand. If something changes, let us know as soon as possible. We can reschedule at no charge. We do not start work until the space is ready per the prep checklist.
- Do you pull permits for mini split installations?
- Permitting requirements vary by jurisdiction. We do not claim to pull permits. Confirming permit needs is the responsibility of the owner or general contractor. We work within your schedule and requirements.
One number, one call, one line item in Austin, Texas. Standard single zone mini split install is $2,400 on a weekday and $2,600 on a weekend, materials and labor, $400 deposit to book, balance due on completion.