Mini Split Installation for San Marcos Builders
You need a flat number you can plug into a bid today. You need a sub who shows up when the drywall crew leaves and does not blow the timeline. You need a clean install your client sees at walkthrough. That sub is Jester Climate.
| Standard single zone install, weekday | $2,400 materials and labor |
|---|---|
| Same install, Saturday or Sunday | $2,600 materials and labor |
| Joker day | One day each week priced under the weekday rate, day shown on the home page |
| Booking deposit | $400 toward materials |
| Balance | Due on completion |
| Non standard work | Quoted before any work begins |
| Bid line item | Single zone mini split install, standard, weekday rate $2,400 |
| Note | Standard install: 1 condenser, 1 air handler, line set, drain, electrical disconnect |
| Note | Site walk confirms line set length, circuit size, drain routing, penetration location |
| Note | Point of contact: (512) 297-7493 |
| Scope confirmed | At the site walk |
| Contact | (512) 297-7493 |
The Bid Number
Standard single zone install on a weekday is $2,400. Weekend install is $2,600. There is also a Joker Day each week at a lower rate. The day changes week to week and is posted on the home page.
Non standard work is quoted before any work begins. You get the number before the crew arrives. No change orders after start.
A $400 materials deposit books the date. Balance due on completion.
- One condenser, one air handler
- Line set, condensate drain, electrical disconnect
- Standard line set cover
- System startup and test
- Cleanup of work area
The Date That Holds
You pick a date. We confirm it. If anything changes we tell you. No guesswork.
We schedule around your drywall timeline. Call when the rough is ready. We set a date that works for both crews.
- Drywall finished and painted
- Ceiling and wall penetrations marked
- Electrical rough in complete with disconnect box in place
- Clear path from exterior to interior unit location
- Exterior wall space for condenser pad
- No debris or obstacles in work area
The Clean Install
Your client walks through and sees neat line set covers, a level condenser pad, and no mess. We keep the jobsite clean during and after the install.
We understand this is your reputation on the line. Every unit we install looks professional and performs as speced.
Repeat Work
One phone call for all your mini split needs across multiple ADUs, casitas, and pool houses. Call (512) 297-7493 to set up repeat scheduling.
We learn your preferences and your site specs. Each job gets the same reliable process.
The Site Walk
Before any work we walk the site. We confirm line set length, circuit size, drain routing, penetration location, and equipment size.
Sizing is a rule of thumb confirmed on site. A casita reads smaller than it loads. West glass and a hot attic push the size up. The size gets confirmed on site.
If your site needs something non standard we quote it then. No surprises.
Included in the number
- One condenser and one air handler
- Line set up to standard length
- Condensate drain line
- Electrical disconnect and whip
- Line set cover (standard)
- System startup and test
- Cleanup of work area
- Standard wall mount bracket for air handler
Quoted before work begins
- Line set runs exceeding standard length
- Additional air handlers or condensers
- Custom drain routing requiring a pump
- Electrical panel upgrade or new circuit from panel
- Ceiling cassette or floor mount installation
- Structural modifications for mounting
Have these done before the install date and the day runs clean. Anything not on this list gets looked at during the site walk.
- Drywall finished and painted
- Ceiling and wall penetrations marked per site walk
- Electrical rough in complete with disconnect box in place
- Clear path from exterior to interior unit location
- Exterior wall space for condenser pad
- No debris or obstacles in work area
- Access to attic or crawl space if needed
- Site PrepCrew arrives and reviews the plan. They protect floors and walls. They lay out tools and materials.
- Line Set InstallationLine set is run from condenser location to air handler location. Connections are made at both ends.
- Electrical ConnectionDisconnect is wired to the condenser. Power is verified. Low voltage wiring is connected between units.
- Indoor Unit MountingAir handler is mounted on the wall bracket. Drain line is connected and tested for flow. Line set cover is installed.
- System Test and CleanupSystem is started and tested. Temperature split and operation are confirmed. Work area is cleaned. Debris is removed.
Phases run in this order on a standard job. Site conditions change the pace, so nothing here is a timeline commitment. If something on site is different from the walk, you get told before it turns into cost.
$400 materials deposit books the date and buys the equipment for your job. Balance due on completion, on the visit the system runs.
$2,400 weekday. $2,600 Saturday or Sunday. One Joker day each week is priced under the weekday rate. The day moves week to week and it is shown on the home page, so if your schedule has slack you can aim at it.
Non standard work is quoted before any work begins. Nothing gets added to the number without you approving it first.
Running the same install across more than one project? Call (512) 297-7493 to set up repeat scheduling.
- What is the standard install price?
- Weekday install is $2,400. Weekend install is $2,600. There is also a Joker Day each week at a lower rate. The day changes week to week and is posted on the home page. Non standard work is quoted before work begins.
- How do I schedule an install?
- Call (512) 297-7493. We agree on a date. The date is confirmed. If anything changes we tell you. No guesswork.
- What does the deposit cover?
- A $400 materials deposit books your install date. The balance is due on completion. We do not start without the deposit.
- What if my site needs something not standard?
- We identify that at the site walk. Line set length, circuit size, drain routing, penetration location, and equipment size are all confirmed then. Any non standard work is quoted before any work begins. No surprises.
- Can you handle multiple ADUs across my projects?
- Yes. Call (512) 297-7493 to set up repeat scheduling. One number for all your mini split needs.
One number, one call, one line item in San Marcos, Texas. Standard single zone mini split install is $2,400 on a weekday and $2,600 on a weekend, materials and labor, $400 deposit to book, balance due on completion.