Fixed Price Mini Split Install: $2,400
You need a number you can plug into a bid today. This is it: $2,400 for a standard single zone mini split, materials and labor, weekday. No waiting on a quote, no surprises at walkthrough.
| Standard single zone install, weekday | $2,400 materials and labor |
|---|---|
| Same install, Saturday or Sunday | $2,600 materials and labor |
| Joker day | One day each week priced under the weekday rate, day shown on the home page |
| Booking deposit | $400 toward materials |
| Balance | Due on completion |
| Non standard work | Quoted before any work begins |
| Bid line item | Single zone mini split install - $2,400 (materials & labor) |
| Note | Standard install: materials and labor |
| Note | Site walk confirms line set, circuit, drain |
| Note | Contact: (512) 297-7493 |
| Scope confirmed | At the site walk |
| Contact | (512) 297-7493 |
Why a Fixed Price Works for Your Bid
You write one line item and move on. No time lost waiting for a sub to quote. No change orders that blow your margin. The number stays the same across projects as long as the job is standard.
Your client sees a clean number in the estimate. When they compare bids, yours has a line item with a price attached. That builds trust without you having to explain a range.
The deposit is $400 to book. Balance due on completion. No net terms, no billing cycle.
What the $2,400 Covers
A standard single zone mini split install includes one indoor unit and one outdoor condenser. We supply all materials and labor. Line set, drain line, electrical disconnect, refrigerant charge, and a full system test are all in that number.
The price holds on a weekday install. Weekend installs are $2,600. One day each week a Joker Day is priced lower than the weekday rate. The day changes weekly and is revealed on the home page.
What Triggers a Quote
Some jobs need extra work that is not in the standard install. We quote that work before we start, so you know the full cost upfront. There are no surprise charges after the job is done.
If the site walk shows conditions outside standard, we give you a fixed number for the additional scope. You accept or adjust before we proceed.
- Line set longer than standard run
- Condenser mounted on a roof or wall bracket
- Multiple indoor units on one condenser
- Electrical panel upgrade or new circuit run
- Custom drain routing through finished walls
- Structural modifications for unit placement
How Scheduling Works
You pick a date for install. We confirm it. If anything changes on our end, we tell you. You are never left waiting for a crew that does not show up.
We work around your timeline. The crew arrives on the day the drywall crew leaves and the area is ready. No wasted days.
Your Checklist Before Install
Leave these items ready before the install crew arrives. It keeps the job running clean and prevents delays. If something is not ready, we adjust the scope or reschedule.
The crew works in the order you prepare. A clear path and open access let them finish without slowing down your project.
- Rough electrical at the unit locations
- Access clear to the install area
- Wall opening for line set if needed
- Concrete pad or wall bracket for condenser
- Drywall crew finished in the zone
- Unit locations confirmed with the owner
- No finishes installed near the mount points
The Install Day Process
Included in the number
- One indoor wall mounted unit
- One outdoor condenser on pad
- Line set connection and insulation
- Drain line routing to daylight or rough drain
- Electrical disconnect and whip
- System evacuation and refrigerant charge
- Full system startup and test
- Basic remote control and operation setup
Quoted before work begins
- Line set that exceeds standard length
- Condenser roof or wall mount
- Multi zone systems
- Electrical panel work or new circuit
- Custom drain routing through finished finishes
- Structural cutting or reinforcement
Have these done before the install date and the day runs clean. Anything not on this list gets looked at during the site walk.
- Rough electrical at both unit locations
- Access path clear to indoor and outdoor spots
- Wall penetration for line set ready
- Condenser pad or mount in place
- Drywall and paint finished in the area
- Owner or GC confirms unit locations
- Setup and ProtectionCrew sets drop cloths and protective mats. Tools and materials staged outside the work area. No debris leaves the jobsite.
- Mounting and RoutingIndoor unit bracket is leveled and secured. Line set and drain are routed through the prepared opening. Outdoor unit is placed on the pad or mount.
- Electrical and RefrigerantElectrical disconnect is wired to both units. Line set connections are torqued and insulated. System is evacuated and charged to manufacturer spec.
- System Test and WalkthroughUnit is powered on and run through all modes. Airflow, drainage, and operation are confirmed. You and the crew walk through what was done.
- Cleanup and SignoffAll packaging and debris are removed. Work area is left clean. Balance is collected and final paperwork is left with the owner or GC.
Phases run in this order on a standard job. Site conditions change the pace, so nothing here is a timeline commitment. If something on site is different from the walk, you get told before it turns into cost.
$400 materials deposit books the date and buys the equipment for your job. Balance due on completion, on the visit the system runs.
$2,400 weekday. $2,600 Saturday or Sunday. One Joker day each week is priced under the weekday rate. The day moves week to week and it is shown on the home page, so if your schedule has slack you can aim at it.
Non standard work is quoted before any work begins. Nothing gets added to the number without you approving it first.
Running the same install across more than one project? Call (512) 297-7493 to set up repeat scheduling.
- Can I put this $2,400 line item in my bid right now?
- Yes, if the job is a standard single zone install in the Austin or I-35 corridor area. The price holds. Use the line item exactly as given. The deposit to book is $400 and the balance is due on completion.
- What if the job needs more than a standard install?
- We quote non standard work before we start. You get a fixed number for the extras. Common examples are a long line set, roof mounted condenser, or multi zone system. No work begins until you approve the quote.
- How do I schedule a date?
- Call or text (512) 297-7493. Tell us your preferred date and we confirm it. If anything changes on our side, we let you know. There is no automatic rescheduling. You stay in control of the timeline.
- Do you handle permits?
- Permit requirements vary by jurisdiction. Confirming requirements is on the owner or general contractor. We can provide the equipment specifications and install details needed for a permit application. We do not pull permits ourselves.
- What is the Joker Day?
- One weekday each week is priced lower than the standard weekday rate. The day changes weekly. Check the home page or call to find out which day it lands on. The Joker Day rate is not listed here because it moves.
One number, one call, one line item along the Austin and I-35 corridor. Standard single zone mini split install is $2,400 on a weekday and $2,600 on a weekend, materials and labor, $400 deposit to book, balance due on completion.