One number. One date. Repeat it across Waco jobs.
Weekday single zone is $2,400, materials and labor. That is the number for a standard install on a Waco job. Call (512) 297-7493.
| Standard single zone install, weekday | $2,400 materials and labor |
|---|---|
| Same install, Saturday or Sunday | $2,600 materials and labor |
| Joker day | One day each week priced under the weekday rate, day shown on the home page |
| Booking deposit | $400 toward materials |
| Balance | Due on completion |
| Non standard work | Quoted before any work begins |
| Bid line item | Single zone mini split install, materials and labor, weekday $2,400 |
| Note | Standard single zone: $2,400 weekday, materials and labor |
| Note | Line set, drain, circuit, size confirmed at site walk |
| Note | Call Jester Climate, (512) 297-7493, for the date |
| Scope confirmed | At the site walk |
| Contact | (512) 297-7493 |
Plug $2,400 into the bid
Standard single zone mini split installation is $2,400 on weekdays, materials and labor. Weekend work is $2,600. One joker day each week is priced lower than the weekday rate. That day changes week to week and is revealed on the home page.
A $400 materials deposit books the date. Balance is due on completion. Non standard work is quoted before any work begins.
You pick the date
Call (512) 297-7493 and name the date that fits the Waco job. The date gets confirmed. If anything changes, you get told.
Name the date that follows drywall if that is your sequence. Do not treat an unconfirmed date as booked. The phone call is what sets it.
What sits in the $2,400
Standard single zone means one indoor unit and one outdoor unit, materials and labor. Line set path, drain routing, penetration location, circuit, and equipment size are confirmed at the site walk. That confirmation happens before install, not during it.
Anything outside that scope is quoted before the crew starts. Extra zones, a condensate pump, and panel work are not in the weekday number. You see that quoted number first.
Walkthrough in front of your client
The indoor unit is on the wall confirmed at the site walk. The outdoor unit is set at the location confirmed at the site walk. The penetration is sealed and the area is swept.
Your client is looking at your job. Open questions at walkthrough make you look unprepared. Non standard items belong in a quote and in the work, not in a debate with the owner.
Same sub on the next Waco job
To set up repeat scheduling, call (512) 297-7493. Keep $2,400 on standard single zone weekday work. Keep $2,600 when the date falls on a weekend.
Keep the line item text identical from job to job. Use the same number. If the next house is not a standard single zone, get the quote before you publish the estimate.
Waco work, I-35 corridor
Service area is Austin and the I-35 corridor. Waco is on that corridor. The number to call is (512) 297-7493.
Size is a rule of thumb until someone is on site. A west facing glass wall and a hot attic change the load. Confirming that is the site walk, not the plans.
Included in the number
- Indoor unit mounted at the confirmed location
- Outdoor unit set at the confirmed location
- Line set and interconnect wiring on the confirmed path
- Condensate drain on the confirmed route
- Circuit and disconnect as confirmed at the site walk
- Penetration at the confirmed location, sealed
- System started and run
- Install debris removed
Quoted before work begins
- Additional zones or extra indoor units
- Condensate pump
- Electrical panel work beyond the circuit confirmed at the site walk
- Routing that is not a standard wall run
- Relocation after the site walk
- Finish repair beyond the penetration
Have these done before the install date and the day runs clean. Anything not on this list gets looked at during the site walk.
- Complete the site walk so size and routing are confirmed
- Pay the $400 materials deposit to book the date
- Keep indoor and outdoor locations clear
- Leave the electrical panel accessible
- Confirm permits if the jurisdiction requires them; that is on the GC or the owner
- Have a site contact who can answer location questions
- Call (512) 297-7493 if the sequence on the job changes before the date
- ArrivalCrew checks indoor and outdoor locations against the site walk. If the layout does not match, the change is quoted before work continues.
- Indoor and outdoor setIndoor unit goes on the wall confirmed at the site walk. Outdoor unit is set at the outdoor location confirmed at the site walk.
- Line set and drainLine set, interconnect wiring, and condensate follow the path confirmed at the site walk.
- CircuitCircuit landing matches what the site walk confirmed. Panel work beyond that is not in the standard number.
- Start and sweepSystem is started and run. Debris is removed so the space is ready for your walkthrough.
Phases run in this order on a standard job. Site conditions change the pace, so nothing here is a timeline commitment. If something on site is different from the walk, you get told before it turns into cost.
$400 materials deposit books the date and buys the equipment for your job. Balance due on completion, on the visit the system runs.
$2,400 weekday. $2,600 Saturday or Sunday. One Joker day each week is priced under the weekday rate. The day moves week to week and it is shown on the home page, so if your schedule has slack you can aim at it.
Non standard work is quoted before any work begins. Nothing gets added to the number without you approving it first.
Running the same install across more than one project? Call (512) 297-7493 to set up repeat scheduling.
- Can I bid $2,400 on a Waco single zone this week?
- Yes, if it is a standard single zone on a weekday, materials and labor. Weekend is $2,600. If the work is not standard, get a quote first. Call (512) 297-7493 before you send the estimate if you are unsure.
- What is the joker day and can I have it in Waco?
- One joker day each week is priced lower than the weekday rate. The day is not fixed. It is revealed on the home page. Call (512) 297-7493 if you want that date.
- Do you pull the mechanical permit?
- No. We do not pull permits. Requirements vary by jurisdiction. Confirming the permit is on the owner or the general contractor.
- How do I set you up across multiple houses?
- Call (512) 297-7493 to set up repeat scheduling. The weekday figure on a standard single zone remains $2,400. Out of scope items still need a quote first.
- How do you size a casita or a glass box?
- A casita reads smaller than it loads. West glass and a hot attic push the size up. The size gets confirmed on site. Do not publish a size from the floor plan alone.
One number, one call, one line item in Waco, Texas. Standard single zone mini split install is $2,400 on a weekday and $2,600 on a weekend, materials and labor, $400 deposit to book, balance due on completion.