One bid number for New Braunfels conditioned rooms
You are adding a conditioned room the main system was never sized for. Plug $2,400 into the bid for a weekday single zone mini split. Call (512) 297-7493 to pick a date and keep one number across jobs.
| Standard single zone install, weekday | $2,400 materials and labor |
|---|---|
| Same install, Saturday or Sunday | $2,600 materials and labor |
| Joker day | One day each week priced under the weekday rate, day shown on the home page |
| Booking deposit | $400 toward materials |
| Balance | Due on completion |
| Non standard work | Quoted before any work begins |
| Bid line item | Single zone mini split, weekday, materials and labor $2,400 |
| Note | Standard install: indoor, outdoor, line set, drain, startup |
| Note | Site walk confirms size, circuit, drain, penetrations |
| Note | Point of contact is (512) 297-7493, Jester Climate |
| Scope confirmed | At the site walk |
| Contact | (512) 297-7493 |
The number you plug into the bid
Standard single zone mini split installation is $2,400 on weekdays, materials and labor. Weekend work is $2,600. One joker day each week is priced lower than the weekday rate; the day changes and is posted on the home page.
A $400 materials deposit books the date. Balance is due on completion. Non standard work is quoted before any work begins. Call (512) 297-7493 for the number.
How scheduling actually works
You pick the date. It gets confirmed. If anything changes, you get told.
Call (512) 297-7493 when the indoor wall is ready and the outdoor location is clear. New Braunfels sits in the Austin and I-35 corridor service area. Do not leave the date to the week of owner walkthrough.
What $2,400 covers, and what it does not
The weekday price is a standard single zone. It covers the indoor unit, outdoor unit, line set, drain, electrical hookup, and start up. Locations, routing, circuit, and equipment size are confirmed at the site walk.
Extra zones, pumps, concealment, and electrical work beyond a standard hookup are not in that number. Those get a quote before any work begins. Nothing starts on a guess.
What your client sees at walkthrough
The indoor unit is on the wall, level, and running. The outdoor unit is set and the lines are dressed. The remote is in the room. You are not explaining an open chase to the owner.
Penetration work is sealed at the units. Debris leaves with the crew. If a finish detail is not in the standard scope, it was already quoted or it is not on the wall.
- Indoor unit level and running
- Outdoor unit set, lines dressed
- Remote left in the room
- Penetration sealed, debris gone
Same sub on the next conversion
Call (512) 297-7493 to set up repeat scheduling. The weekday number stays $2,400 for a standard single zone. Weekend work stays $2,600.
The bid line does not change from job to job when the scope is a standard single zone. Call the same number. Put Jester Climate on the HVAC line of the estimate.
Sizing a room the main system missed
A casita reads smaller than it loads. West glass and a hot attic push the size up. A garage conversion picks up load from slab, doors, and uninsulated walls. Treat those as a rule of thumb only.
Equipment size is confirmed at the site walk. So are line set routing, drain routing, circuit size, and penetration location. Do not send a floor plan and expect a locked size.
Included in the number
- Indoor unit mounted at the location confirmed at the site walk
- Outdoor unit placed as confirmed at the site walk
- Line set and control wiring run, connected, and insulated
- Condensate drain installed as confirmed at the site walk
- Electrical hookup for a standard single zone as confirmed at the site walk
- System evacuated and started at completion
- Penetrations sealed at the indoor and outdoor units
- Controller left with the superintendent
Quoted before work begins
- Additional zones beyond a single indoor unit
- Ducted, cassette, or floor console indoor units
- Condensate pump
- Line hide or architectural concealment
- Electrical work beyond a standard single zone hookup
- Drywall patch, texture, or paint beyond the unit penetration
Have these done before the install date and the day runs clean. Anything not on this list gets looked at during the site walk.
- Indoor wall location marked and clear of tools and stock
- Outdoor location accessible for setting the unit
- Drywall on at the indoor wall unless the site walk agreed on open framing
- Electrical panel accessible
- Superintendent name and number on site or posted
- Permit in hand if the owner or GC determined one is required
- Path from truck to both unit locations kept open
- ConfirmCrew checks indoor location, outdoor location, circuit, drain path, and penetrations against the site walk. Work does not start on a changed layout without a quote.
- Indoor unitIndoor unit goes on the wall confirmed at the site walk. Mount is level and the wall opening is cut for the line set and drain.
- Outdoor unit and linesOutdoor unit is set as confirmed at the site walk. Line set and control wiring are run, connected, and insulated.
- Drain and electricalDrain is routed as confirmed at the site walk. Electrical hookup for the standard single zone is completed as confirmed at the site walk.
- Start up and handoffSystem is evacuated and started. Superintendent gets a walk of indoor unit, outdoor unit, and controller before the crew leaves.
Phases run in this order on a standard job. Site conditions change the pace, so nothing here is a timeline commitment. If something on site is different from the walk, you get told before it turns into cost.
$400 materials deposit books the date and buys the equipment for your job. Balance due on completion, on the visit the system runs.
$2,400 weekday. $2,600 Saturday or Sunday. One Joker day each week is priced under the weekday rate. The day moves week to week and it is shown on the home page, so if your schedule has slack you can aim at it.
Non standard work is quoted before any work begins. Nothing gets added to the number without you approving it first.
Running the same install across more than one project? Call (512) 297-7493 to set up repeat scheduling.
- Can I put $2,400 in a New Braunfels bid today?
- Yes, if the job is a standard single zone mini split on a weekday. Materials and labor are in that number. Call (512) 297-7493 if the layout looks non standard so extras are quoted before you issue your estimate.
- What does weekend work cost?
- Weekend installation is $2,600 for a standard single zone, materials and labor. Book it with the $400 materials deposit. Call (512) 297-7493 and pick the date.
- What is joker day?
- One joker day each week is priced lower than the weekday rate. The day changes week to week. It is revealed on the home page. Call (512) 297-7493 if you want that date for a New Braunfels job.
- Do you pull the permit in New Braunfels?
- No. Requirements vary by jurisdiction. Jester Climate is not a permitting authority. Confirming permit needs is on the owner or the general contractor.
- The drywall date moved. What then?
- Call (512) 297-7493. You pick the new date. It gets confirmed. If anything changes, you get told.
One number, one call, one line item in New Braunfels, Texas. Standard single zone mini split install is $2,400 on a weekday and $2,600 on a weekend, materials and labor, $400 deposit to book, balance due on completion.