Mini Split Installs for San Marcos Remodels & Conversions
Add conditioned space without touching the main system. One number for your bid, one call to schedule, one clean install at walkthrough.
| Standard single zone install, weekday | $2,400 materials and labor |
|---|---|
| Same install, Saturday or Sunday | $2,600 materials and labor |
| Joker day | One day each week priced under the weekday rate, day shown on the home page |
| Booking deposit | $400 toward materials |
| Balance | Due on completion |
| Non standard work | Quoted before any work begins |
| Bid line item | Mini split install, single zone, materials & labor: $2,400 |
| Note | Standard install covers one indoor/outdoor unit pair |
| Note | Site walk confirms line set, circuit, drain, penetration, sizing |
| Note | Point of contact is the crew lead on install day |
| Scope confirmed | At the site walk |
| Contact | (512) 297-7493 |
One number for your bid, no surprises
Plug $2,400 into your estimate for a standard single zone mini split. Weekends are $2,600. One JOKER DAY each week is priced lower than the weekday rate; check the home page for which day it lands.
The $400 materials deposit books the date. Balance is due when the install is complete. Non standard work is quoted before any work begins.
Dates that hold, no timeline blowouts
Pick a weekday date when the drywall crew is clear. The date gets confirmed when you book. If anything changes, you get told.
Crews show up ready to work. No waiting on parts, no callbacks. The install is done before the next trade steps in.
What the client sees at walkthrough
Indoor unit is level, mounted tight to the wall. Line set is sleeved, sealed, painted to match. Outdoor unit is on a pad, clear of debris.
No cut corners, no sloppy work. The install looks like it belongs in the house.
What gets confirmed at the site walk
Line set length, circuit size, drain routing, penetration location, and equipment sizing are all confirmed on site. No change orders after the fact.
Sizing is a rule of thumb confirmed on site. A casita reads smaller than it loads; west glass and a hot attic push the size up.
Repeat scheduling across jobs
Same number, same process, same result. Call (512) 297-7493 to set up repeat scheduling.
Included in the number
- One indoor wall-mounted unit
- One outdoor condenser unit
- Line set connection between units
- Electrical circuit and disconnect
- Condensate drain routing
- Wall penetration and sealing
- Equipment mounting and leveling
- Startup and system check
Quoted before work begins
- Line set longer than standard
- Additional electrical work
- Non standard drain routing
- Non standard wall penetration
- Equipment relocation after install
- Any work outside standard scope
Have these done before the install date and the day runs clean. Anything not on this list gets looked at during the site walk.
- Drywall and paint complete
- Electrical panel accessible
- Outdoor pad or mounting location ready
- Wall penetration area clear
- Pathway for line set and drain clear
- No obstructions near indoor or outdoor units
- Client or site contact available for site walk
- Site walkCrew lead confirms line set, circuit, drain, penetration, and sizing. Any non standard work is quoted before proceeding.
- MountingIndoor and outdoor units are mounted and leveled. Wall penetration is cut and sleeved.
- Line set and drainLine set is run and connected. Condensate drain is routed and secured.
- ElectricalCircuit is run and connected. Disconnect is installed at the outdoor unit.
- StartupSystem is started, checked for proper operation. Crew lead reviews the install with the site contact.
Phases run in this order on a standard job. Site conditions change the pace, so nothing here is a timeline commitment. If something on site is different from the walk, you get told before it turns into cost.
$400 materials deposit books the date and buys the equipment for your job. Balance due on completion, on the visit the system runs.
$2,400 weekday. $2,600 Saturday or Sunday. One Joker day each week is priced under the weekday rate. The day moves week to week and it is shown on the home page, so if your schedule has slack you can aim at it.
Non standard work is quoted before any work begins. Nothing gets added to the number without you approving it first.
Running the same install across more than one project? Call (512) 297-7493 to set up repeat scheduling.
- What's the difference between a standard and non standard install?
- Standard covers one indoor/outdoor unit pair with typical line set length, circuit, drain routing, and wall penetration. Non standard work, like longer line sets, additional electrical, or non typical drain routing, is quoted before work begins.
- How do I know what size unit to bid?
- Sizing is a rule of thumb confirmed at the site walk. West-facing windows, attic heat, and insulation levels all affect the final size. The crew lead will confirm the right unit before install.
- What if the install date changes?
- You pick the date when you book. If anything changes, you get told. There's no penalty for rescheduling, but the deposit holds the slot until you confirm a new date.
- Who handles permits?
- Permit requirements vary by jurisdiction. Confirming that is on the owner or the general contractor. We don't pull permits.
- Can I book multiple installs at once?
- Call (512) 297-7493 to set up repeat scheduling. Same process, same number, same result.
One number, one call, one line item in San Marcos, Texas. Standard single zone mini split install is $2,400 on a weekday and $2,600 on a weekend, materials and labor, $400 deposit to book, balance due on completion.