Jester ClimateBuilder sheet (512) 297-7493
Sheet B-079 / Remodelers and Conversion Crews Rev A / Austin and I-35 corridor
Local Sub Coverage

Mini split installs for Waco builders

One number for your bid. One call to schedule. A clean install the client sees at walkthrough. Repeat it across jobs.

Weekday install$2,400
Weekend install$2,600
Materials deposit$400
BalanceOn completion
Spec sheetScreenshot this for the bid folder
Standard single zone install, weekday$2,400 materials and labor
Same install, Saturday or Sunday$2,600 materials and labor
Joker dayOne day each week priced under the weekday rate, day shown on the home page
Booking deposit$400 toward materials
BalanceDue on completion
Non standard workQuoted before any work begins
Bid line itemMini split install, single zone, materials & labor: $2,400
NoteStandard install covers single zone, materials and labor
NoteSite walk confirms line set, circuit, drain, penetration, equipment size
NotePoint of contact is the crew lead on install day
Scope confirmedAt the site walk
Contact(512) 297-7493

The number for your bid

Weekday install is $2,400. Weekend is $2,600. One JOKER DAY each week is priced lower than the weekday rate; check the home page for which day it lands.

Non standard work is quoted before any work begins. You get the number up front, no surprises on the invoice.

  • $400 materials deposit to book
  • Balance due on completion
  • No extra charges unless quoted first
  • No change orders unless confirmed in writing

How scheduling works

You pick the date. It gets confirmed. If anything changes, you get told.

We show up the day the drywall crew leaves. No overlap, no delay to your timeline.

What a standard install covers

Single zone mini split, materials and labor. Line set, circuit, drain, penetration, and equipment size are confirmed at the site walk.

Rule of thumb: a casita reads smaller than it loads, west glass and a hot attic push the size up. The size gets confirmed on site.

What triggers a quote

Anything outside the standard install gets quoted before work begins. You know the cost up front.

Examples: multiple zones, long line sets, complex drain routing, non standard penetrations.

Prep checklist for the builder

Leave the space ready for install. The crew needs clear access and a clean workspace.

Confirm power is available and the location for the indoor and outdoor units is accessible.

Repeat scheduling across jobs

Call (512) 297-7493 to set up repeat scheduling. One number, one call, same process every time.

Scope of workStandard single zone install

Included in the number

  • Single zone mini split installation
  • Materials and labor included
  • Line set routing confirmed on site
  • Circuit sizing and installation
  • Drain routing confirmed on site
  • Penetration location confirmed on site
  • Equipment sizing confirmed on site
  • Clean install, no debris left behind

Quoted before work begins

  • Multiple zone installations
  • Long line sets beyond standard
  • Complex drain routing
  • Non standard penetrations
  • Additional electrical work
Leave this readySite condition checklist

Have these done before the install date and the day runs clean. Anything not on this list gets looked at during the site walk.

  • Space cleared and accessible
  • Power available at install location
  • Indoor and outdoor unit locations accessible
  • No obstructions in work area
  • Drywall crew completed before install date
  • Client not present during install
  • Site walk completed before booking
Install dayPhase order, no clock times promised
  • ArrivalCrew arrives at the confirmed time. Site walk review to confirm details.
  • SetupWork area is prepped. Tools and materials are staged.
  • InstallationLine set, circuit, drain, and units are installed. Penetration is sealed.
  • TestingSystem is tested for operation. Crew confirms no issues.
  • CleanupWork area is cleaned. Debris is removed. Client walkthrough ready.

Phases run in this order on a standard job. Site conditions change the pace, so nothing here is a timeline commitment. If something on site is different from the walk, you get told before it turns into cost.

How the money worksTwo payments, no surprises

$400 materials deposit books the date and buys the equipment for your job. Balance due on completion, on the visit the system runs.

$2,400 weekday. $2,600 Saturday or Sunday. One Joker day each week is priced under the weekday rate. The day moves week to week and it is shown on the home page, so if your schedule has slack you can aim at it.

Non standard work is quoted before any work begins. Nothing gets added to the number without you approving it first.

Running the same install across more than one project? Call (512) 297-7493 to set up repeat scheduling.

Questions builders ask
What's included in the $2,400 install?
Single zone mini split, materials and labor. Line set, circuit, drain, penetration, and equipment size are confirmed at the site walk. Non standard work is quoted before any work begins.
How do I book a date?
Call (512) 297-7493 with the job details. A $400 materials deposit confirms the date. The balance is due on completion.
What if the install isn't standard?
Anything outside the standard scope is quoted before work begins. You get the number up front, no surprises on the invoice.
Who do I talk to on install day?
The crew lead is your point of contact. They confirm details at the site walk and handle any questions during the install.
How do I repeat this across jobs?
Call (512) 297-7493 to set up repeat scheduling. Same process, same number, every time.
Related builder sheets
Book it

One number, one call, one line item in Waco, Texas. Standard single zone mini split install is $2,400 on a weekday and $2,600 on a weekend, materials and labor, $400 deposit to book, balance due on completion.

Call (512) 297-7493